Designed for the space
Dimensions and layout are checked against the room and your priorities.
Hinged-door wardrobes in Estepona. Each door swing is checked against the bed, bedside tables and room doors. Hinges must allow access to internal drawers.
A hinged door reveals the whole module, but its width and swing must work with the bed, bedside tables, sockets and circulation. The proposal continues to prioritise balanced storage, calm detailing and coordination with other trades.
Dimensions and layout are checked against the room and your priorities.
We compare suitable materials and hardware before the specification is approved.
The quotation identifies the furniture, fitting and any optional or separate work.
Your contact coordinates questions about the proposal and the next steps.

I'm Gonzalo Parra. If the kitchen, wardrobes and living room feel like unrelated projects, let's look at the whole home. We can organise needs and establish a basis for comparing the options.
No obligation. Rough measurements are enough to get started.
More doors do not guarantee better access. We specify width, hinges, handles and modules so the elevation remains proportionate and practical. In Estepona, it is tested against a mix of narrow urban access and gated developments, strong light and wider refurbishment work.
We draw every door open against the bed, bedside table, wall and entrance door. The decision is recorded. The final reference: the user can stand in front without becoming trapped.
We relate door count to modules, height and elevation rhythm before the drawing is closed. Once that decision is made, the doors do not become heavy or fragment the elevation without reason.
We select hinge quantity and type according to height, weight and opening rather than transferring a standard composition. On that basis, the project has a specific outcome: each door retains alignment and adjustment through use.
Sequence matters. First, we align the door, division and pull-out accessories. The second condition: drawers, rails and baskets remain accessible without overlap.
A hinged door works well when the elevation, interior and space in front have been drawn together. The scenarios are adjusted for old-town properties, new apartments, penthouses and villas.

Instead of assuming a standard answer, we divide the elevation around personal interiors and one shared zone. The intended result can be stated plainly: each person opens their module without moving another door. The proposal must continue to prioritise balanced storage, calm detailing and coordination with other trades.

We allow separation, an opening restriction or a proportionate trim. The handle and edge do not mark the perpendicular wall. The actual property conditions in Estepona take priority over a catalogue solution.

We calculate weight, stiffness, hinges and adjustment points. One condition still applies: the vertical composition does not lose stability. The approach is adapted to old-town properties, new apartments, penthouses and villas, without turning location into a preset style.
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on InstagramWidth, height, handle and hinge produce different demands. The storage interior sets the most useful rhythm. The actual property in Estepona completes the choice.
| Configuration | Usually solves | Critical check |
|---|---|---|
| Applied handle | Need addressed: Direct opening and visible detail | A fact that changes the system: Projection, impact and ergonomics |
| Finger pull or push | Need addressed: Quieter elevation | Do not close the design without reviewing: Grip, fingerprints and adjustment |
| Two wide doors | Typical context: Short wardrobe with broad access | Acceptance criterion: Weight and swing space |
| Four or six doors | Worth considering where there is: Long wall with clear modules | A fact that changes the system: Rhythm, junctions and simultaneous opening |
| Full-height door | Suitable situation: Continuous vertical elevation | Verified during the survey: Stiffness, hinges and floor clearance |
| Separate top cupboard | Worth considering where there is: Daily storage below, seasonal above | A fact that changes the system: Horizontal line and access |
The proposed solution shows the elevation closed and open, allowing swing, access and layout to be approved ahead of fabrication.
Each door swing starts from the complete room. That is why we survey the wardrobe, bed, bedside tables, doors, windows, sockets and route.
This point is explained before pricing: we detail quantity, width, height, joints, handles and horizontal lines. The later check confirms the essential result: the elevation responds to the wardrobe interior and wall proportion. The proposal must continue to prioritise balanced storage, calm detailing and coordination with other trades.
First, we align modules, rails, drawers and accessories with each opening. After that, all contents are reached through the corresponding door.
A nominal dimension is not enough here. We specify load, hinge quantity, closing, restriction and adjustment. After the review, the intended movement is documented.
A nominal dimension is not enough here. We close substrate, thickness, lacquer, veneer, board, mirror and edges. After the review, the door retains flatness and durability.
The proposal becomes more coherent when we hang, adjust gaps, check closing and review rubbing points. The requirement remains unchanged: the elevation is handed over level and functional.
Moving switches, correcting walls, decoration or removing the old wardrobe are separate items when applicable. Any additional work identified in Estepona is added only after it has been explained and priced.
Door count, height, finish, hinges, interior and fitting space change cost and programme. In Estepona, we also confirm a mix of narrow urban access and gated developments, strong light and wider refurbishment work.
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
The room, opening, access and door movement are checked before the layout and elevation are approved.
Drawings, finishes, hardware, included work and project estimate are accepted before fabrication is booked.
Delivery, protection, installation, adjustment and final review are coordinated in Estepona. The proposal must continue to prioritise balanced storage, calm detailing and coordination with other trades.
During design, we evaluate wide doors, higher door counts, top cupboards and continuous panels. The drawing can progress once this result is clear: the selected composition reflects its actual work.
With the recess verified, we size hinges, soft closing, push catches, restrictors and accessories. Approval depends on one clear result: each mechanism relates to weight and frequency.
We assess side by side board, lacquer, veneer, mirror, finger pulls and applied handles. Preparation, edging and machining appear in the included work.
This is not about adding more modules. We include carcasses, equipment, access, hanging, adjustment and review. Usefulness is tested in one way: the elevation is assessed as part of the complete wardrobe. The proposal must continue to prioritise balanced storage, calm detailing and coordination with other trades.
Projects may involve old-town properties, new apartments, penthouses and villas. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.
For custom hinged-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.
A mix of narrow urban access and gated developments, strong light and wider refurbishment work can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.
The recommendation continues to prioritise balanced storage, calm detailing and coordination with other trades. Materials and accessories are compared by care and usefulness, not by a presumed local style.
We publish how to contact us and when the team is available. Project-recorded particulars in Estepona are recorded before manufacture.
MMV Studio publishes proyectos@mueblesmedidavalencia.es and a link to the applicable legal information on mueblesamedidaestepona.es.
Enquiries are handled Monday to Friday, 09:00–13:00 and 14:00–20:00; Saturday, 10:00–13:30 and 16:00–19:30.
The guarantee is not reduced to a broad promise: limits, period, components and care requirements appear in the approved order.
mueblesamedidaestepona.es gathers experiences in its own linked collection. They are not attributed to an external platform.
A project manager reviews the enquiry, requests any missing details and follows the work from measurement to final installation.

List the furniture needed in each room and the finishes you would like to share. We can then review the overall consistency and the scope of each space.
Scope and terms are confirmed before you place an order.
Narrower leaves can be compared where they improve opening, weight or proportion. The interior must remain accessible.
Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.
The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.